Fittings & Drain Equipment
Fill/Drain & Overflow Fittings
Everlastics Fill/Drain & Overflow Fittings are mostly used for ebb & flow and drip systems. In an ebb & flow system, you pump the water from your reservoir up to your flood table. When the water level gets to the level of the overflow fitting, it spills back into the reservoir from the overflow fitting.FROM $0.29 Click for more information
Titanium Nitride Step Drills
Titanium Nitride Step Drill Bits, the two cutting head design gives you a smooth cut on plastics. They come 2 in a set. The small bit is great for cutting grommet holes and the large bit is perfect for cutting fill/drain fitting holes in flood trays. The bit automatically de-burrs the holes.MSRP $27.95 Click for more information
1/4'' Barbed Fittings
A barbed connector is used for attaching 1/4'' Vinyl tubing to mainline (1/2 Poly) tubing or for joining two pieces of micro-tubing together. Use Elbows where right angles are needed to get in and out of containers.FROM $0.20 Click for more information
1/2'' Barbed Fittings
A barbed connector is used for attaching 2 lengths of tubing together. Use Elbows where right angles are needed to get around corners. Tees are used for branching of tubing. Shut-Off Valves are useful for many things. Click Clamps will hold tubing on pumps and barbed fittings, preventing the tubing from loosening over time.FROM $0.40 Click for more information
Hole Plugs
Hole Plugs are used when you need to plug holes in your 1/2'' Poly Tubing. They snap into the tubing, preventing water from coming out of the punched hole. If you remove 1/4'' drippers or 1/4'' connectors, these will completely seal the hole.MSRP $1.00 Click for more information
1/2'' Grommets
These Grommets by C.A.P. can be used to replace old, worn grommets in your hydroponic systems and are essential components when making your own hydroponic system. They will fit the 1/2'' barbed fittings and 13/16'' to 7/8'' hole size for a snug fit.MSRP $9.95 Click for more information
Poly End Plug
These End Plugs are used at the end of your 1/2'' Poly Tubing to close it off to create pressure for your drippers, etc.. The cap is removable and has a 3/4'' hose fitting on the end to connect to a hose for easy drip line flushing and cleaning.MSRP $1.95 Click for more information
In-Line Water Filter
These filters are made to filter out sediment and non-soluble particles from your nutrients. This will help prevent clogged drippers and lines. It has a replaceable filter element. 3/4'' threads.FROM $4.95 Click for more information
1/4'' Tubing Support Stakes
4” Tubing Support Stakes stakes hold 1/4'' tubing in place next to plants. Works great in rockwool or soil.MSRP $0.17 Click for more information
No Clog Drip Stake
These No Clog Drip Stakes are for use with hydroponic drip-watering systems. These drip stakes are designed with a protective basket to prevent buildup and clogs. They are 4'' tall and stick perfectly into rockwool cubes or grow rocks for intermittent or constant watering. They are not pressure compensating, so they will not clog. They fit on 1/4'' tubing.MSRP $0.35 Click for more information
Aeroponic Spinner
Our Aeroponic Spinner/Sprinklers are great for building your own aeroponic or cloning systems. These jets deliver a 360° water spray using just pump pressure. They can be screwed into PVC piping or Poly tubing.MSRP $1.49 Click for more information
Micro Spray Jets
Our Micro Spray Jets are great for building your own aeroponic or cloning systems. These jets deliver a 360° water spray using just pump pressure. They can be screwed into PVC piping or Poly tubing.MSRP $0.80 Click for more information
ADC-1
The ADC-1, Auto-Drain Controller, allows you to put in a wastewater drain anyplace that you would like. It consists of a controller bucket with a float switch. When the float switch detects the presence of water, it turns on the pump (not included) to pump out your water to a waste drain of your choice, even higher than the controller. MSRP $159.95 Click for more information
1/4'' Vinyl Micro Tubing
1/4'' Vinyl Micro Tubing is used to go from 1/2'' Poly line to the drippers or drip stakes that will water your plants. It comes in 50’ and 100’ lengths. Simply attach the 1/2'' Poly line with 1/4'' connectors for a leakproof fit.FROM $7.49 Click for more information
1/2'' & 3/4'' Tubing, Blue & Black
1/2'' Tubing is the standard tubing used to connect to pumps, 1/2'' connectors, etc. It is flexible and does not kink easily. The 3/4'' tubing is used to connect to 3/4'' pump outlets. Available in translucent blue and solid black. Solid black prevents algae growth.FROM $27.95 Click for more information
1/2'' Poly Tubing
When making a Drip System, poly tubing is used as the main drip line. You punch holes into it using a hole punch, and then insert 1/4'' connectors to attach to 1/4'' vinyl tubing which is attached to your drippers or drip stakes. The end is sealed using a Poly End Plug.MSRP $23.95 Click for more information
Button Drippers
Inline Drippers are used when you need to drip water off of a 1/4'' vinyl tube, but not at the end of the tube. They are placed in-line with each other so that you do not need a separate 1/4'' vinyl tube for each plant. Standard drippers are used at the end of the line. Both maintain the same flow rates at different water pressures.FROM $4.49 Click for more information
Hole Punches
Designed for comfortable use. Punches holes in 1/2'' Poly Tubing to insert 1/4'' connectors or drippers. Two punches are available, a manual punch and a professional punch. If you are punching many holes, you will want to consider the professional punch, as it makes punching holes in Poly Tubing quick and easy.FROM $3.79 Click for more information
1/4'' Float Valves
These float valves are made to connect to 1/4'' tubing and are perfect for hooking up to the Reverse Osmosis Systems to control water production. Available with either a long or short stem. They are brass and will last for years.FROM $8.95 Click for more information
1/2'' Float Valves
An essential part for do-it-yourself hydroponic systems and maintaining reservoir levels. It has a 1⁄2'' brass barbed fitting to attach to standard 1⁄2'' tubing.MSRP $14.95 Click for more information
Blackstar Neoprene Collars
These collars use a superior grade material and an innovative design to stand out above the competition, while retaining industry standard pricing. The unique 8 spoke design allows for larger stemmed cuttings without gapping.MSRP $0.50 Click for more information